Mikrotik - Dual WAN Load Balancing pppoe-clients PCC

Result

########PPPoE-CLIENTS##########

/interface pppoe-client

add ac-name="" add-default-route=yes allow=pap,chap default-route-distance=1 dial-on-demand=no \

    disabled=no interface=ether1 keepalive-timeout=60 max-mru=1480 max-mtu=1480 mrru=1600 name=\

    pppoe-out1 password=XXXX profile=default service-name="" use-peer-dns=yes user=\

    XXXXXX

add ac-name="" add-default-route=yes allow=pap,chap default-route-distance=1 dial-on-demand=no \

    disabled=no interface=ether2 keepalive-timeout=60 max-mru=1480 max-mtu=1480 mrru=1600 name=\

    pppoe-out2 password=XXXXXXXXXX profile=default service-name="" use-peer-dns=yes user=\

    XXXXXXXXX

########FIREWALL MANGLE########

/ip firewall mangle

add chain=prerouting in-interface=pppoe-out1

add chain=prerouting in-interface=pppoe-out2

add action=mark-connection chain=prerouting dst-address-type=!local \

    new-connection-mark=wan1_conn per-connection-classifier=\

    both-addresses-and-ports:2/0

add action=mark-connection chain=prerouting dst-address-type=!local \

    new-connection-mark=wan2_conn per-connection-classifier=\

    both-addresses-and-ports:2/1

add action=mark-routing chain=prerouting connection-mark=wan1_conn \

    new-routing-mark=to_wan1

add action=mark-routing chain=prerouting connection-mark=wan2_conn \

    new-routing-mark=to_wan2

########FIREWALL NAT#########

/ip firewall nat

add action=masquerade chain=srcnat out-interface=pppoe-out1

add action=masquerade chain=srcnat out-interface=pppoe-out2

########IP ROUTE############

/ip route

add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 routing-mark=to_wan1 scope=30 target-scope=10

add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 routing-mark=to_wan2 scope=30 target-scope=10

add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 scope=30 target-scope=10

add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 scope=30 target-scope=10

fonte: http://www.itlearnweb.com